Influence of binder type and process parameters on the compression properties and microbial survival in diclofenac tablet formulations

The influence of binder type and process parameters on the compression properties and microbial survival in diclofenac tablet formulations were studied using a novel gum from Albizia zygia. Tablets were produced from diclofenac formulations containing corn starch, lactose and dicalcium phosphate. Formulations were analyzed using the Heckel and Kawakita plots. Determination of microbial viability in the formulations was done on the compressed tablets of both contaminated and uncontaminated tablets prepared from formulations. Direct compression imparted a higher plasticity on the materials than the wet granulation method. Tablets produced by wet granulation presented with a higher crushing strength than those produced by the direct compression method. Significantly higher microbial survival (p< 0.05) was obtained in formulations prepared by direct compression. The percent survival of Bacillus subtilis spores decreased with increase in binder concentration. The study showed that Albizia gum is capable of imparting higher plasticity on materials and exhibited a higher reduction of microbial contaminant in the formulations. The direct compression method produced tablets of reduced viability of microbial contaminant.

A influência do tipo de ligante e os parâmetros do processo de propriedades de compressão e sobrevivência microbiana em comprimidos de diclofenaco foram estudados utilizando uma nova goma de Albizia zygia. Os comprimidos foram produzidos a partir de formulações de diclofenaco contendo amido de milho, lactose e fosfato bicálcico. As formulações foram analisadas usando os gráficos de Heckel e Kawakita. A determinação da viabilidade microbiana nas formulações foi feita nos comprimidos contaminados e não contaminados preparados a partir de formulações. A compressão direta confere maior plasticidade dos materiais do que o método de granulação úmida. Comprimidos produzidos por granulação úmida apresentaram maior força de esmagamento do que aqueles produzidos pelo método de compressão direta. Observou-se sobrevivência significativamente maior (p<0,05) em formulações preparadas por compressão direta. A sobrevivência percentual dos esporos de Bacillus subtilis diminuiu com o aumento da concentração do agregante. O estudo mostrou que a goma de Albizia é capaz de conferir maior plasticidade aos materiais e apresentou maior redução da contaminação microbiana nas formulações. O método de compressão direta produziu comprimidos com viabilidade reduzida de contaminantes microbianos.

Powder properties of binary mixtures of chloroquine phosphate with lactose and dicalcium phosphate / Propriedades do pó de misturas binárias de fosfato de cloroquina com fosfato bicálcico e lactose

A study was conducted on the packing and cohesive properties of chloroquine phosphate in binary mixtures with lactose and dicalcium phosphate powders. The maximum volume reduction due to packing as expressed by the Kawakita constant, a, and the angle of internal flow, θ, were the assessment parameters. The individual powders were characterized for their particle size and shape using an optical microscope. Binary mixtures of various proportions of chloroquine phosphate with lactose and dicalcium phosphate powders were prepared. The bulk and tapped densities, angles of repose and internal flow, as well as compressibility index of the materials were determined using appropriate parameters. The calculated and determined values of maximum volume reduction for the binary mixtures were found to differ significantly (P< 0.05), with the Kawakita plot being more reliable in determining the packing properties. Diluent type was found to influence the flow properties of the mixtures, with dicalcium phosphate giving predictable results while mixtures containing lactose were anomalous with respect to flow. The characterization of the packing and cohesive properties of the binary mixtures of chloroquine with lactose and dicalcium phosphate would be useful in the production of powders, tablets, capsules and other drug delivery systems containing these powders with desirable and predictable flow properties.

Realizou-se estudo das propriedades de empacotamento e de coesão do fosfato de cloroquina em misturas binárias com lactose e fosfato dicálcico em pó. O volume máximo de redução devido ao empacotamento, segundo expresso pela constante de Kawakita, a, e o ângulo de fluxo interno, θ, foram os parâmetros de avaliação. Os pós individuais foram caracterizados por seu tamanho e forma de partículas, utilizando microscópio óptico. Prepararam-se misturas binárias de várias proporções de fosfato de cloroquine e lactose e fosfato dicálcico em pó. As densidades de bulk and tapped, os ângulos de repouso e de fluxo interno e o índice de compressibilidade dos materiais foram determinados utilizando-se parâmetros apropriados. Os valores calculados e determinados do volume máximo de redução para as misturas binárias mostraram-se significativamente diferentes (P< 0,05), sendo o traçado de Kawakita mais confiável na determinação das propriedades de empacotamento. O tipo de diluente influenciou as propriedades de fluxo das misturas com fosfato dicálcico, dando resultados previsíveis, enquanto as misturas contendo lactose mostraram-se anômalas com relação ao fluxo. A caracterização das propriedades de empacotamento e de coesão das misturas binárias de cloroquina com lactose e fosfato dicálcico seria útil na produção de pós, comprimidos, cápsulas e outros sistemas de liberação de fármacos contendo esses pós com propriedade de fluxo desejada e previsível.

Influence of process variables on release properties of paracetamol tablets.

A 2(3) factorial experimental design has been used to quantitatively study individual and interaction effects of the nature of binder (N), binder concentration (c) and relative density of tablet (d) on the disintegration time (DT) and dissolution times, t1, t50 and t90, of paracetamol tablet formulations. The factorial design was also used to study the quantitative effects of pregelatinization of starch binders on these parameters, i.e., N, c and d. In general, the most common ranking of the individual effects on DT, t1, t50 and t90 for native/native, pregelatinized/pregelatinized and native/pregelatinized starch binder formulations was c > d > N. For interaction effects, the most common ranking was N-c > c-d > N-d for all formulations. The results generally showed that c can considerably affect DT, t1, t50 and t90 of the tablets.

Effects of starches on the mechanical properties of paracetamol tablet formulations. II. Sorghum and plantain starches as disintegrants.

This study evaluates the disintegrant properties--tablet disintegration time (DT) and crushing strength--friability/disintegration time (CSFR/DT) ratio of a paracetamol tablet formulation prepared with sorghum and plantain starches in comparison with corn starch BP. The effects of disintegrant concentration, relative density of tablets and the mode of disintegrants addition were studied. The study revealed that the rank order of effectiveness of the starches as disintegrants was corn > plantain > sorghum. The mode of addition of disintegrants, disintegrant concentration and relative density had a significant impact on the disintegrant properties. The tested starches, namely, sorghum and plantain, showed promising results.

The effects of starches on mechanical properties of paracetamol tablet formulations. I. Pregelatinization of starch binders.

A study has been made of the effects of pregelatinization of native sorghum and plantain starches on the mechanical properties of a paracetamol tablet formulation in comparison with corn starch BP. The mechanical properties tested, viz. tensile strength (T) and brittle fracture index (BFI) of the paracetamol tablets were affected by pregelatinization of the starch. The results suggest that pregelatinized starches may be useful as binders when a particular degree of bond strength and brittleness is desired.